![asrock ion 330 bios usb boot asrock ion 330 bios usb boot](https://www.tweaktown.com/images/imagebank/asrockion330bd-specs.png)
- #Asrock ion 330 bios usb boot how to#
- #Asrock ion 330 bios usb boot install#
- #Asrock ion 330 bios usb boot update#
Below is a (slightly modified) copy of his files:
#Asrock ion 330 bios usb boot how to#
He shows how to use fixed device names based on the serial numbers of the USB device instead of creating a 'random' number. I've googled the Internet and found a solution from Steve Gudmundson: When mythbackend started to record from /dev/video1 it produces an error (from the mythbackend log):Ĭhannel(/dev/video1)::Open(): Can't open video device, error "Input/output error" After the tuners got powered on again I ended up with For example /dev/video1 was still there even if all three tuners were powered down. I've had some problems with tuners not unregistering themselves correctly. When you hook up multiple pvrusb2 tuners to your ASRock they show up as /dev/video0, /dev/video1, /dev/video2.
#Asrock ion 330 bios usb boot update#
Use update manager to update all software Note yourįinally, restart the network card with the following command. Add a new set for "eth0" so that the wholeĬontent of the file looks something like the following. Next, issue this command to modify the Mythbuntu box its network settings. Also, have you decided on an IP address for your Take a note what your current broadcast, subnet mask, and gateway Shutdown system, remove USB stick and power on.įirst, check out what your current settings are. This saves about 45Watt (3 x 15Watt).īurn to CD or use UNetbootin to create a bootable USB stick from the iso (this saves you a CD :-) The idea behind using the Silvershield (and extra IR receiver and USB hub) is to switch off the 3 tuners when they are not recording and when the MythFrontend (liveTV) is not used. 1 fast USB hub with external power supply and.Mythtv 0.22 on my ASRock ION 330 system using Mythbuntu 9.10This manual give's an overview of how I installed Mythtv 0.22 on my ASRock ION 330 system using Mythbuntu 9.10 One of the settings I made was that this system starts after the power is switched in (you don't want to shut down a server after a short power loss) WARNING: don't turn off the power when the flash process is busy or you'll end up with a brick. Select the suitable BIOS version and flash.ASRock Instant Flash will automatically detect all devices and only list those BIOS versions which are suitable for your motherboard.Select the utility under menu to execute it.Press during POST to get into BIOS setup menu.
![asrock ion 330 bios usb boot asrock ion 330 bios usb boot](https://www.asrock.com/mb/photo/A330ION(M1).png)
Save the BIOS files on a device such as USB disk, hard disk.The process of flashing a new BIOS is very simple:ĭowload the latest BIOS from the ASRock website (make sure you have the right one!!!) Mine got delivered with P1.50 but ASRock had P1.50 as latest stable BIOS so I flashed this one.
#Asrock ion 330 bios usb boot install#
If you can't read the menu that displays in a split second, here it is:į2 is BIOS setup (from BIOS version > 1.60 you can also use the DEL key for setup)īefore starting to install the system, first check to see if there are any BIOS updates from the manufacturer. After updating my ASRock, I spend hours to get rid of the "CMOS checksum error" because the keyboard didn't work with the USB tuners plugged in.